top of page



Color Management


FSI’s 2nd generation Color Fidelity and LUT Interpolation Engine (CFE2) houses multiple 4,913 point (173) calibration and DIT (look) LUTs for highly accurate color reproduction and effective look management. Instantly select from Rec709, EBU, SMPTE-C, DCI P3, Rec2020 Emulation*, Native Wide Gamut, and Custom User Generated color spaces.
Additional gamma, peak luminance, and color temperature toggles further add to the versatility of this monitor.
All CFE2 equipped monitors also feature an easy to use menu toggle to instantly switch between data (full) range monitoring or video (legal) range monitoring modes.

*Does not fully cover Rec2020








Calibration


FSI monitors come pre-calibrated from the factory and free recalibration is always available for customers that would like to send their units in to an FSI service department.
Quickly and easily perform your own 3D LUT based calibration with advanced color management solutions like LightIllusion's LightSpace CMS or SpectraCal's CalMAN.
Enterprise-level clients that own a large number of BM210 can also take advantage of FSI’s Volumetric AutoCal using a Minolta CA310. Contact us for details.






DIT LUTs


Upload and store up to 16 3D DIT LUTs and instantly toggle between them using the up and down buttons.






Video Scopes


A wide variety of scopes and meters are available. Display up to two scopes on screen at a time. Scopes can be positioned in any of 6 on-screen positions. When using two scopes the scope windows can be stacked horizontally or vertically depending on your preference. Video scopes work across all inputs, even DVI.





RGB Parade

Parade waveform. Adjustable parade intensity. Levels above or below 100IRE show in white for easier identification.







Audio Meters


This monitor features several audio metering tools as well as the ability to disembed any single channel or stereo pair of audio to the monitor’s internal speakers or audio line out. Disembedded audio is always delayed by the exact amount of video processing time to ensure proper lip-sync.

Horizontal Audio Level Meters


Display 2, 8, or 16 channels of audio arranged in audio groups or stereo pairs with real-time numerical display of dB levels per channel. Meters feature adjustable Alignment Level, Permitted Max Level, and Peak Hold Time. Select between True Peak, PPM Type I, or PPM Type II ballistics. Meters will indicate NO DATA if an audio group is not embedded in the signal to differentiate it from audio channels that may be mute, but still embedded.





16 channel audio level meter display with adjustable Alignment Level, Permitted Max Level, and Peak Hold Time. Select between True Peak, PPM Type I, or PPM Type II ballistics. Meters will indicate NO DATA if an audio group is not embedded in the signal to differentiate it from audio channels that may be mute, but still embedded.







CIE Scope


A dedicated function that maps full frame signal data onto your choice of CIE1931 x,y or CIE1976 u’,v’ diagrams. Signal information is shown relative to your active color space and can be compared to a selectable secondary color gamut.






Measurement (8 & 10bit)


Get precise real-time YRGB measurements, both as a percentage and 8 or 10bit data values, of any point or sample area within your incoming signal. Set a spatial and temporal reference and compare with any other point to quantify the difference in values between any two points. Also quantify the difference in points as an F/stop value.


CIE Measurement


Visualize any point or sample area within your incoming signal on your choice of CIE 1931 x,y or CIE1976 u’,v’ diagrams. Values are shown relative to your current operating color space and regardless of diagram mode R’,G’,B’, Y%, x,y,u’,v’ values are reported at all times. As with the standard measurement mode a reference position can be selected and compared to any other position. The difference between current and reference positions is also quantified with a dE2000 value.
 






Video Data Analyzer


Provides real-time readout of video data at the pixel level in your choice of decimal or hexadecimal values. Can show pixel level information as YCbCr or RGB as well as 8bit or 10bit.
This feature can be used in combination with the H/V delay mode for horizontal and vertical blanking data analysis.









Markers


Choose from a wide assortment of standard markers and safety areas that can be displayed as lines, translucent overlays, or solid overlays. Lines and overlays have selectable colors for instant customization.
Don't see the marker you need here? Send it to us as a 1920x1080 .bmp file and we can add it in a future firmware update.

14:9

14:9 CS

15:9

16:9

16:9 in 4:3

17:9

32:9

ADOBE

DISCOVERY






Crosshatch


Generate an onscreen grid overlay with the Crosshatch function to help with camera pitch and angle relative to screen content.


Custom Graticules


Create custom rectangular markers quickly with the Custom Graticules feature that generates four movable lines on screen. Graticule line position and span between lines is reported for easy reference.






Live Side-By-Side Monitoring


FSI's unique live side-by-side monitoring feature allows for mixed formats, mixed frame rates, and even mixed input types to be viewed together in PAP, PIP, or POP configurations.






Split-Screen Viewing


Horizontal and vertical split-screen viewing with adjustable split positioning is also possible with two sources that share the same resolution and frame-rate.






Lum Coloring (Adjustable Exposure Check)


Adjustable false color display of luminance values. 4 adjustment points all

FSI Flanders Scientific BM210 21"

  • The BM210 is a lightweight and power-efficient 21.5” broadcast monitor with an extended feature set geared towards production, editorial, and broadcast environments.

Related Products